Profile Configuration

Profile Configuration handling in midi2Processor

This enable processing of MIDI-CI Profiles. These methods are available if #define M2_DISABLE_PROFILE is not set.

void sendProfileListRequest(uint8_t group, uint32_t srcMUID, uint32_t destMuid, uint8_t destination);

Send a Request to get list of Profiles. This will generate the SysEx data that is then set to the function provided by setRawSysEx, which is then sent based on how the applications wishes to send out data.

Use a destination of 0x7F to get all Profiles across all channels. Enabled and Disabled Profiles are sent to the setRecvProfileEnabled and setRecvProfileDisabled respectively.

midi2Processor MIDI2 (0);
//Send a Request to Group 1 to to the remote MUID using MIDI CI ver 1 to the whole Port.
//This should return the Profiles on ALL channels and any port-wide Profiles.
MIDI2.sendProfileListRequest(0, localMUID, remoteMuid, 0x7F);

void sendProfileListResponse(uint8_t group, uint32_t srcMUID, uint32_t destMuid, uint8_t destination, uint8_t profilesEnabledLen, uint8_t* profilesEnabled, uint8_t profilesDisabledLen , uint8_t* profilesDisabled );

Send a Profile List Response Message. This will generate the SysEx data that is then set to the function provided by setRawSysEx, which is then sent based on how the applications wishes to send out data.

profilesEnabledLen and profilesDisabledLen represent how many Profiles. profilesEnabled and profilesDisabled arguments should be 5 times the length of profilesEnabledLen and profilesDisabledLen respectively.

void profileInquiry(uint8_t group, uint32_t remoteMUID, uint8_t destination){  
  uint8_t profileNone[0] = {};
  
  // If a Profile Inquiry is Recieved where destination = 0x7F, you should also return 
  // the Profiles on each channel. In this example Destination of 0 = channel 1, so
  // the Profile is also returned for Channel 1 or destination = 0x7F
  if(destination == 0 || destination == 0x7F){
    uint8_t profileDrawBar[5] = {0x7E, 0x40, 0x01, 0x01};
    MIDI2.sendProfileListResponse(group, localMUID, remoteMUID, 0, 1, profileDrawBar, 0, profileNone);
  }

  if(destination == 0x7F){
   MIDI2.sendProfileListResponse(group, localMUID, remoteMUID, 0x7F, 0, profileNone, 0, profileNone);
  }
}

midi2Processor MIDI2 (0);
...
MIDI2.setRecvProfileInquiry(profileInquiry);

void sendProfileOn(uint8_t group, uint32_t srcMUID, uint32_t destMuid, uint8_t destination, uint8_t* profile)

This will generate the SysEx data that is then set to the function provided by setRawSysEx, which is then sent based on how the applications wishes to send out data.

profile is always 5 bytes.

void sendProfileOff(uint8_t group, uint32_t srcMUID, uint32_t destMuid, uint8_t destination, uint8_t* profile)

This will generate the SysEx data that is then set to the function provided by setRawSysEx, which is then sent based on how the applications wishes to send out data.

void sendProfileEnabled(uint8_t group, uint32_t srcMUID, uint32_t destMuid, uint8_t destination, uint8_t* profile)

This will generate the SysEx data that is then set to the function provided by setRawSysEx, which is then sent based on how the applications wishes to send out data.

void sendProfileDisabled(uint8_t group, uint32_t srcMUID, uint32_t destMuid, uint8_t destination, uint8_t* profile)

This will generate the SysEx data that is then set to the function provided by setRawSysEx, which is then sent based on how the applications wishes to send out data.

void sendProfileSpecificData(uint8_t group, uint32_t srcMUID, uint32_t destMuid, uint8_t destination, uint8_t* profile, uint16_t datalen, uint8_t* data);

inline void setRecvProfileInquiry(void (*fptr)(uint8_t group, MIDICI ciDetails))

sendProfileListResponse should be used in Response to this Message.

inline void setRecvProfileEnabled(void (*fptr)(uint8_t group, MIDICI ciDetails, uint8_t destination, uint8_t* profile))

inline void setRecvProfileDisabled(void (*fptr)(uint8_t group, MIDICI ciDetails, uint8_t destination, uint8_t* profile))

inline void setRecvProfileOn(void (*fptr)(uint8_t group, MIDICI ciDetails, uint8_t destination, uint8_t* profile))

inline void setRecvProfileOff(void (*fptr)(uint8_t group, MIDICI ciDetails, uint8_t destination, uint8_t* profile))

inline void setRecvProfileDetails(void (*fptr)(uint8_t group, MIDICI ciDetails, uint8_t* profile, uint16_t datalen, uint8_t* data, uint16_t part, bool lastByteOfSet))