config-translate of Chinese.yml

[Rainsry]

config-translate of Chinese.yml

Could you please allow me to reprint your plugin to MCBBS ? (www.mcbbs.net) which is the largest Minecraft forum in China .You know not all of them are good at English, they can't read your post (Even with Google translator) they need a Chinese translator.People in the MCBBS will love your plugin .
I'll NEVER claim it as mine, I just wanna translate it and let more people know it. And I will mark out your (author’s) name and the download link from spigotmc.org
Thank you ! Hope for your reply!
Here is the translation of the config

# StackMob 5.0 Configuration file - by antiPerson and contributors.
#
# Most options can be customised for specific entity types, for details about this, see the end of this file.
# Asterisk meaning:
# (*) This option cannot be overridden in the 'custom' section at the end of this file.
# (**) The following option requires the use of Paper (https://papermc.io) because the API needed is not in Spigot.
#
# If the comments have been removed, you can find a version with comments at https://github.com/Nathat23/StackMob-5/tree/master/src/main/resources

# StackMob 5.0配置文件-由antiPerson和贡献者们提供。
# 翻译汉化：Rainsry
# 大多数选项可以针对特定的生物类型进行自定义，有关详细信息，请参见此文件的末尾。
# 星号（*）的意义：
# （*）一个星号：一个*中的选项中的内容不能出现在此文件结尾的 “Custom” 中。
# （**）两个星号：两个*中的需要需要使用 Paper（https://papermc.io），因为所需的API不在spigot中
# 如果已删除注释，则可以在GitHub中找到含注释的版本 https://github.com/Nathat23/StackMob-5/tree/master/src/main/resources
stack:
  # The maximum size that a stack can have.
  # 一个堆叠后生物可以合并的最大数量。
  max-size: 30
  # How often entities should be checked for stacking (in ticks. 20 ticks = 1 second) (*)
  # 应该多久检查一次生物的堆叠情况（以ticks为单位。20个ticks = 1秒钟）（*）
  interval: 100
  # The area around an entity for which applicable stacks should be found.
  # Format: [(x cord),(y cord),(z cord)]
  # 对生物进行堆叠的检测范围是多少
  # 格式：merge-range: [x ,z ,y ] （xz为横向半径 y为纵向半径）
  merge-range: [10,10,10]
  # Only begin to stack entities when this amount of entities are nearby.
  # 仅在生物数量达到或超过所设定的值时才开始堆叠生物
  # 格式：amount: 数量
  threshold:
    enabled: true
    amount: 5

# Names of worlds where there should be no stacking
# 不进行生物堆叠的世界的名称
# 默认情况为黑名单，若想使用白名单，则将“worlds-blacklist-inbert: false ”设置为“true”
# 意为变为白名单
# 使用格式：worlds-blacklist: [世界名]
worlds-blacklist: []
worlds-blacklist-invert: false
# Types of entity which should not stack
# 不进行堆叠的生物种类
# 使用格式：types-blacklist: [生物名]
types-blacklist: [VILLAGER]
types-blacklist-invert: false
# If the entity's spawns reason is listed below, do not stack.
# 如果生物的生成原因是下方列表中所有的，则该生物将不会进行堆叠
reason-blacklist: []
reason-blacklist-invert: false

display-name:
  # The formatting of the name tag which is shown when the stack size is above the threshold.
  # Placeholders:
  # %type% - the entity's type
  # %size% - the size of the stack
  # 有堆叠生物时堆叠的主体显示的名称
  # 占位符：
  # %type% - 生物的类型
  # %size% - 堆叠的数量
  format: '&a%type% &d(%size%)'
  # Whether the display tag can only be seen when the player targets the entity.
  # Mode:
  # ALWAYS - The tag will always be visible as long as the entity is loaded.
  # HOVER - The tag will only be visible when the player hovers their crosshair on the entity.
  # NEARBY - The tag will only be visible when the player is in range of the entity. (more resource intensive, requires ProtocolLib on 1.15 servers)
  # 名称是否仅在玩家将该生物作为目标时才能看到。
  # 模式：
  # ALWAYS - 只要生物已加载，名称就始终可见。
  # HOVER  - 仅当玩家将十字准星悬停在生物上时，名称才可见。
  # NEARBY - 仅当玩家生物范围内时，名称才可见。 （此选项需要更多资源，且在1.15服务器上需要ProtocolLib）
  visibility: NEARBY
  # Options for when 'NEARBY' is used above. (*)
  # 上方设置使用“ NEARBY” 时的选项。（*）
  nearby:
    # The range from which the tag should be visible.
    # Format: [(x cord),(y cord),(z cord)]
    # 标签可见的范围。
    # 格式：[X , Z , Y ]
    range: [12,6,12]
    # How often (in ticks) the tag visibility status of an entity should be updated. (20 ticks = 1 second)
    # 生物的名称可见性状态应多久更新一次（以ticks为单位，20 ticks = 1 秒钟）
    interval: 20
  # Don't show the tag if the stack size of this entity if it is equal to or below the value specified.
  # 如果此生物的堆叠数量等于或小于指定的值，则不显示标签。
  threshold: 1

# Whether entity specific traits (eg. profession, colour) should be segregated (*)
# 是否应区分生物的特定特征（例如，职业，肤色）（*）
traits:
  sheep-color: true         # 是否保留可爱的羊咩咩的羊毛颜色
  sheep-sheared: true       # 是否保留可爱的被剪过羊毛的羊咩咩
  slime-size: true          # 是否保留可爱的史莱姆的尺寸大小
  horse-color: true         # 是否保留不同马的皮毛颜色
  llama-color: true         # 是否保留不同可爱的羊驼的颜色
  parrot-variant: true      # 是否保留不同鹦鹉的种类
  drowned-hand-item: true   # 是否掉落怪物（如僵尸）手中持有的物品
  age: true                 # 是否维持堆叠生物的不同年龄
  breed-mode: true          # 是否能进行繁殖
  love-mode: true           # 是否能进入恋爱/爱情模式（牛/猪/羊……）
  cat-type: true            # 是否保留猫的不同类型
  mooshroom-variant: true   # 是否保留不同蘑菇牛的种类
  fox-type: true            # 是否保留不同可爱的小狐狸的种类
  bee-nectar: true          # 堆叠后的蜜蜂是否能进行采蜜
  bee-stung: true           # 堆叠后的蜜蜂是否能蜇人
  zoglin-baby: true         # 猪宝宝是否能进行堆叠
  piglin-baby: true         # 疣猪兽的宝宝是否能进行堆叠
  leashed: true             # 堆叠后的生物是够能被栓绳操作

# Prevent stacked mobs from targeting players.
# Similar to no-ai, but allows for movement of entities.
# 是否防止堆叠后的怪物攻击玩家
# 类似于将怪物变成没有AI的生物，但是可以进行移动
# 下方的“enable:false”设置为“false”时，即为进行堆叠后的怪物会攻击玩家；设置为“true”时，即为进行堆叠后的怪物不会攻击玩家
disable-targeting:
  enabled: false
  # If the entity's type is listed below, do not disable targeting.
  # 如果某生物出现在下方的列表中，则所堆叠的怪物对玩家进行攻击
  # 格式：type-blacklist: [生物名]
  type-blacklist: []
  type-blacklist-invert: false
  # If the entity's spawns reason is listed below, do not disable targeting (**)
  # 如果生物的生成原因是下方列表中所有的，则该生物
  reason-blacklist: []
  reason-blacklist-invert: false

# What should be done when these entity actions occur. (*)
# 当这些生物动作发生时应该做些什么。(*)
events:
  # When an entity is feed its food.
  # 当一个生物被喂食后，将进行繁殖时
  breed:
    enabled: true
    # MULTIPLY - spawn as many baby entities possible providing there is enough food fed.
    # SPLIT - slice off an entity to that it can be bred normally.
    # 模式：
    # MULTIPLY - 如果有足够的食物喂养，则堆叠的生物尽可能多地进行繁殖。
    # SPLIT    - 将所堆叠的生物一个个“切割”开来（解除堆叠状态），成为正常的生物，然后进行繁殖
    mode: MULTIPLY
  # When an entity is dyed.
  # 当生物被染色时（比如羊咩咩被染色了）
  dye:
    enabled: true
    # MULTIPLY - dye as many entities possible providing there is enough dye.
    # SPLIT - slice off an entity to that it can be dyed normally.
    # 模式：
    # MULTIPLY - 如果有足够的染料，则会尽可能多的染色
    # SPLIT    - 将所堆叠的生物一个个“切割”开来（解除堆叠状态），然后进行染色
    mode: MULTIPLY
  # When an entity is sheared.
  # 当一个生物被剪刀进行操作时。（比如羊咩咩被剪羊毛）
  shear:
    enabled: true
    # MULTIPLY - shear as many entities possible providing the shears have enough durability.
    # SPLIT - slice off an entity to that it can be sheared normally.
    # 模式：
    # MOUTIPLY - 只要剪刀有足够的耐久。则会尽可能多地进行剪（羊毛）
    # SPLIT    - 将所堆叠的生物一个个“切割”开来（解除堆叠状态），然后进行剪（羊毛）处理
    mode: MULTIPLY
  multiply:
    # Chicken eggs and turtle scutes.
    # （可爱的小鸡生的）鸡蛋和（乌龟）鳞甲
    drops: true
    explosion: true
    slime-split: true
  divide:
    nametag: true
    tame: true
    # Only bees now
    # 这里仅仅是关于蜜蜂的配置
    enter-block: true
  remove-stack-data:
    # Should we remove the stack data of an entity that was unstacked as a result of nametag division/split?
    # Setting this to false will cause entities that were nametagged to potentially become stacked again.
    # 我们是否应该删除由于命名牌而未进行堆叠的生物的数据（是否堆叠由命名牌标记后的生物）
    # 将“nametag”设置为“false”时，则将导致被命名牌标记后的生物仍会被堆叠
    # 设置为“true”时，则被命名牌所标记后的生物不会被堆叠
    nametag: true

# How entities should die
# 堆叠后的生物的死亡方式
death:
  # Death options:
  # SINGLE - Only one entity dies.
  # ALL - Every entity dies.
  # STEP - A random amount dies.
  # STEP_DAMAGE - An amount that depends on the damage done dies.
  #
  # The priority 1 is highest and 4 is lowest.
  # If the killed entity is blacklisted, either by type or death reasons, by the highest priority method,
  # then it will attempt to use the next highest priority death method.
  # 死亡方式的几种不同选项：
  #
  # SINGLE - 在击杀所堆叠的生物时，每次击杀只会死亡一个生物
  # ALL    - 在击杀所堆叠的生物时，会一次性杀死堆叠生物中包含的全部生物
  # STEP   - 在击杀所堆叠的生物时，每次击杀所死亡的生物是随机的
  # STEP_DAMAGE - 在击杀所堆叠的生物时，每次击杀所死亡的生物取决于伤害大小
  #
  # 此配置中 1 为最高优先级， 4 为最低优先级
  # 请注意，此处的优先级（priority）是从 1 到 4 依次执行
  # 插件将使用最高优先级执行堆叠生物的死亡方式，
  # 如果生物的死亡原因/生物的类型处于黑名单中，将尝试使用下一个优先级的死亡方式，直到成功执行. 或者全部失败。
  SINGLE:
    priority: 4
    reason-blacklist: []
    reason-blacklist-invert: false
    type-blacklist: []
    type-blacklist-invert: false
  ALL:
    priority: 3
    reason-blacklist: []
    reason-blacklist-invert: false
    type-blacklist: []
    type-blacklist-invert: false
  STEP:
    priority: 2
    reason-blacklist: []
    reason-blacklist-invert: false
    type-blacklist: []
    type-blacklist-invert: false
    max-step: 5
    min-step: 1
  STEP_DAMAGE:
    priority: 1
    reason-blacklist: []
    reason-blacklist-invert: false
    type-blacklist: []
    type-blacklist-invert: false

# Multiply entity drops on entity death.
# 生物死亡时，生物掉落的物品是否乘以堆叠的数量
drops:
  enabled: true
  use-loot-tables: true
  # If each mob should only drop one of the items in the list.
  # 如果每个怪物死亡时只会掉落列表中的一项物品
  one-per-stack: []
  one-per-stack-invert: false
  # Items that should not be dropped.
  # 生物死亡时不会掉落的物品
  item-blacklist: []
  item-blacklist-invert: false
  # Death reasons that should not mean that drops are multiplied.
  # 生物死亡时不会掉落乘以数量时的死亡原因
  reason-blacklist: []
  reason-blacklist-invert: false
  # Types of entity for which drops should not be dropped for.
  # 死亡时不会掉落物品的生物种类
  type-blacklist: []
  type-blacklist-invert: false

# Multiply entity experience on entity death.
# 生物死亡时，生物掉落的经验是否乘以堆叠的数量
experience:
  enabled: true
  # The bounds that should be used for the random multiplier.
  # 对掉落经验时进行随机乘数的限制范围（最小范围/最大范围）
  multiplier-min: 0.5
  multiplier-max: 0.8
  # Types of entity for which exp should not be dropped for.
  # 死亡时不会掉落经验的生物种类
  type-blacklist: []
  type-blacklist-invert: false

# Multiply the player stats which can be seen by the player from the game menu.
# 乘以玩家可以从游戏菜单看到的玩家统计数据。
player-stats: true

# If specific entities should have a waiting time before their first stack.
# Designed for monster grinders etc.
# 是否设置特定生物进行堆叠前，有一段等待时间
# 用于刷怪塔等设施（防止生成的怪物在空中掉落时进行堆叠）
wait-to-stack:
  enabled: true
  # For (x) times the stack task fires after spawn, don't stack this entity.
  # 在生物生成（X）times 后，才会开始对该生物进行堆叠
  wait-time: 5
  # Entity types that this should work for.
  # 以下是适用于此设置（延迟堆叠）的生物
  types-whitelist:
    - ZOMBIE
    - SKELETON
    - PIG_ZOMBIE
    - CREEPER
    - ENDERMAN
  types-whitelist-invert: false
  # Spawn reasons that this should work for.
  # 由刷怪笼而生成的生物也会进行延迟堆叠
  reasons-whitelist:
    - SPAWNER
  reasons-whitelist-invert: false

# Enable/disable integration with other plugins. (*)
# 启用/禁用与其他插件的挂钩组合。（*）
hooks:
  # Allows the custom 'entity-stacking' flag to be used in worldguard regions.
  # 允许自定义 “生物堆叠” 适用于worldguard区域。
  worldguard: true
  mythicmobs:
    enabled: true
    blacklist: []
    blacklist-invert: false
  # Prevent citizens npcs from stacking.
  # 是否防止 Citizens NPC 进行堆叠
  citizens: true
  # Prevent stacked entities from giving mcmmo experience.
  # 是否防止堆叠的生物提供 MCMMO 经验
  mcmmo: true
  # Prevent stacked entities from giving job payments.
  # 是否防止堆叠后的生物提供“job payment” 
  jobs: true
  # Allows the use of ProtocolLib, which is used when the server version is not the native one of the plugin.
  # 是否允许使用 Protocol Lib
  protocollib: true

## Some options can be modified for specific entity types. An example is shown below. Remove comments to see this in action.
## Options and sections with a (*) in the comment preceding cannot be overridden.
#custom:
#  # The entity type
#  CREEPER:
#    # The option to override. This should be the same as it appears above.
#    stack:
#      max-size: 30
#  SKELETON:
#    # Entities can also inherit options from other entities, using the 'clone' option preceded by the entity type to clone.
#    clone: CREEPER
#    # The cloned custom options can still be overridden.
#    stack:
#      max-size: 5
#
# 您可以使用下方的配置，针对某些特定生物修改某些选项。示例如下所示（以一只可爱的苦力怕做示例）
# 在上方所有阐述的配置中，注释中有一个*号的内容，不能在下方出现！
#custom:
#  # The entity type 
#  CREEPER:
#    # 此处的自定义设置，能覆盖上方所进行的全局设置。
#    stack:
#      max-size: 30
#  SKELETON:
#    # 生物也可以从其他生物的自定义设置中继承设置，通过“clone”
#    # “clone”用于复制其他生物的自定义设置，并覆盖之前所定义的值
#    clone: CREEPER
#    # “clone” 中的设置，仍然可以在下方"stack"中进行二次重写，并覆盖之前的定义
#    stack:
#      max-size: 5
# 设置好之后，你就会发现，苦力怕的最大堆叠数量变成了5个
# 好啦，翻译到这里就结束了~如果某处翻译有误，请第一时间在MCBBS通知我
# 我会给予1人气20金粒的奖励~

[Aurelien30000]

Wow thanks for that, but currently, there is no way to really include it on the plugin itself, maybe on StackMob's spigot page & a link in the default config!