Add guest boot sanity tests with passthrough device support

qemu/tests/cfg/emulated_amd_iommu.cfg

@@ -0,0 +1,57 @@
+- emulated_amd_iommu:
+    type = qemu_pci_passthrough
+    start_vm = no
+    only Linux
+    only x86_64
+    only HostCpuVendor.amd
+    pcie_extra_root_port = 0
+    vt_ulimit_nofile = 65536
+    usb_devices = ""
+    auto_cpu_model = "no"
+    cpu_model = "host"
+    machine_type = "q35"
+    machine_type_extra_params = "kernel-irqchip=split"
+    extra_params = " -global kvm-pit.lost_tick_policy=discard"
+    vcpu_sockets = 1
+    vcpu_dies = 1
+    vcpu_threads = 1
+    mem = 8G
+    mode = "x2apic"
+    variants:
+        - no_passthrough:
+            required_qemu = [8.2.90,)
+        # TODO Add passthrough variant
+    variants:
+        - vcpu_512:
+            smp_fixed = 512
+            vcpu_maxcpus = 512
+            vcpu_cores = 512
+        - vcpu_288:
+            smp_fixed = 288
+            vcpu_maxcpus = 288
+            vcpu_cores = 288
+        - vcpu_256:
+            smp_fixed = 256
+            vcpu_maxcpus = 256
+            vcpu_cores = 256
+        - vcpu_254:
+            smp_fixed = 254
+            vcpu_maxcpus = 254
+            vcpu_cores = 254
+        - vcpu_128:
+            smp_fixed = 128
+            vcpu_maxcpus = 128
+            vcpu_cores = 128
+        - vcpu_64:
+            smp_fixed = 64
+            vcpu_maxcpus = 64
+            vcpu_cores = 64
+    variants:
+        - x2apic_emul_amd_iommu:
+            cpu_model_flags += ",+x2apic"
+            extra_params += " -device amd-iommu,intremap=on,xtsup=on"
+            kvm_probe_module_parameters = "avic=0"
+        - x2avic_emul_amd_iommu:
+            cpu_model_flags += ",+x2apic"
+            extra_params += " -device amd-iommu,intremap=on,xtsup=on"
+            kvm_probe_module_parameters = "avic=1"

qemu/tests/cfg/iommu_accelerated_guest_mode.cfg

@@ -0,0 +1,65 @@
+- iommu_accelerated_guest_mode:
+    type = qemu_pci_passthrough
+    start_vm = no
+    only Linux
+    only x86_64
+    only HostCpuVendor.amd
+    pcie_extra_root_port = 0
+    vt_ulimit_nofile = 65536
+    usb_devices = ""
+    auto_cpu_model = "no"
+    cpu_model = "host"
+    machine_type = "q35"
+    machine_type_extra_params = "kernel-irqchip=split"
+    extra_params = " -global kvm-pit.lost_tick_policy=discard"
+    vcpu_sockets = 1
+    vcpu_dies = 1
+    vcpu_threads = 1
+    mem = 8G
+    mode = "x2apic"
+    kvm_probe_module_parameters = "avic=1"
+    # Update pci_device with host PCI device/s for passthrough to the guest
+    # enabling IOMMU functionality validation. eg. pci_device = "0000:01:00.0"
+    # Note: Without a PCI device input, the guest will still boot, but the
+    # test won't exercise the host IOMMU.
+    #pci_device = ""
+    variants:
+        - vcpu_512:
+            smp_fixed = 512
+            vcpu_maxcpus = 512
+            vcpu_cores = 512
+        - vcpu_288:
+            smp_fixed = 288
+            vcpu_maxcpus = 288
+            vcpu_cores = 288
+        - vcpu_256:
+            smp_fixed = 256
+            vcpu_maxcpus = 256
+            vcpu_cores = 256
+        - vcpu_254:
+            smp_fixed = 254
+            vcpu_maxcpus = 254
+            vcpu_cores = 254
+        - vcpu_128:
+            smp_fixed = 128
+            vcpu_maxcpus = 128
+            vcpu_cores = 128
+        - vcpu_64:
+            smp_fixed = 64
+            vcpu_maxcpus = 64
+            vcpu_cores = 64
+    variants:
+        - avic:
+            mode = "apic"
+            cpu_model_flags += ",-x2apic"
+            no vcpu_512, vcpu_288, vcpu_256
+        - x2avic_ext_apic_id:
+            cpu_model_flags += ",+x2apic"
+            cpu_model_flags += ",kvm-msi-ext-dest-id=on"
+        - x2avic_emul_intel_iommu:
+            intel_iommu = yes
+            iommu_eim = on
+            iommu_intremap = on
+            guest_iommu_option = pt
+            iommu_caching_mode = on
+            cpu_model_flags += ",+x2apic"

qemu/tests/cfg/iommu_guest_mode.cfg

@@ -0,0 +1,69 @@
+- iommu_guest_mode:
+    type = qemu_pci_passthrough
+    start_vm = no
+    only Linux
+    only x86_64
+    only HostCpuVendor.amd
+    pcie_extra_root_port = 0
+    vt_ulimit_nofile = 65536
+    usb_devices = ""
+    auto_cpu_model = "no"
+    cpu_model = "host"
+    machine_type = "q35"
+    machine_type_extra_params = "kernel-irqchip=split"
+    extra_params = ""
+    vcpu_sockets = 1
+    vcpu_dies = 1
+    vcpu_threads = 1
+    mem = 8G
+    mode = "x2apic"
+    kvm_probe_module_parameters = "avic=0"
+    # Update pci_device with host PCI device/s for passthrough to the guest
+    # enabling IOMMU functionality validation. eg. pci_device = "0000:01:00.0"
+    # Note: Without a PCI device input, the guest will still boot, but the
+    # test won't exercise the host IOMMU.
+    #pci_device = ""
+    variants:
+        - vcpu_1024:
+            smp_fixed = 1024
+            vcpu_maxcpus = 1024
+            vcpu_cores = 1024
+        - vcpu_512:
+            smp_fixed = 512
+            vcpu_maxcpus = 512
+            vcpu_cores = 512
+        - vcpu_288:
+            smp_fixed = 288
+            vcpu_maxcpus = 288
+            vcpu_cores = 288
+        - vcpu_256:
+            smp_fixed = 256
+            vcpu_maxcpus = 256
+            vcpu_cores = 256
+        - vcpu_254:
+            smp_fixed = 254
+            vcpu_maxcpus = 254
+            vcpu_cores = 254
+        - vcpu_128:
+            smp_fixed = 128
+            vcpu_maxcpus = 128
+            vcpu_cores = 128
+        - vcpu_64:
+            smp_fixed = 64
+            vcpu_maxcpus = 64
+            vcpu_cores = 64
+    variants:
+        - apic:
+            mode = "apic"
+            cpu_model_flags += ",-x2apic"
+            no vcpu_1024, vcpu_512, vcpu_288, vcpu_256
+        - x2apic_ext_apic_id:
+            cpu_model_flags += ",+x2apic"
+            cpu_model_flags += ",kvm-msi-ext-dest-id=on"
+        - x2apic_emul_intel_iommu:
+            intel_iommu = yes
+            iommu_eim = on
+            iommu_intremap = on
+            guest_iommu_option = pt
+            iommu_caching_mode = on
+            cpu_model_flags += ",+x2apic"

qemu/tests/cfg/vfio_pci_passthrough.cfg

@@ -0,0 +1,19 @@
+- vfio_pci_passthrough:
+    type = qemu_pci_passthrough
+    start_vm = no
+    only Linux
+    only x86_64
+    only HostCpuVendor.amd
+    pcie_extra_root_port = 0
+    vt_ulimit_nofile = 65536
+    usb_devices = ""
+    auto_cpu_model = "no"
+    cpu_model = "host"
+    machine_type = "q35"
+    extra_params = ""
+    mem = 8G
+    # Update pci_device with host PCI device/s for passthrough to the guest
+    # enabling IOMMU functionality validation. eg. pci_device = "0000:01:00.0"
+    # Note: Without a PCI device input, the guest will still boot, but the
+    # test won't exercise the host IOMMU.
+    #pci_device = ""

qemu/tests/qemu_pci_passthrough.py

@@ -0,0 +1,176 @@
+"""
+Guest boot sanity test with passthrough device in different mode
+- Apic, X2apic, Avic, X2avic
+"""
+
+from avocado.utils import dmesg, linux_modules, pci, process
+from virttest import env_process
+
+
+def run(test, params, env):  # pylint: disable=R0915
+    """
+    Guest boot sanity test with passthrough device
+    Steps:
+    1. Launch a guest with a vfio pci passthrough device
+    2. Verify if vfio pci passthrough of device to guest is successful
+       and guest boots in expected mode - apic, avic, x2apic and x2avic.
+
+    :param test: QEMU test object.
+    :param params: Dictionary with test parameters:
+        - pci_device: Pci device to passthrough. Default: ""
+        - mode: Defines guest modes - [apic, x2apic]. Default: x2apic.
+        - kvm_probe_module_parameters: To enable/disable avic on host.
+                                       Possible values ["avic=1", "avic=0"]
+        - login_timeout: VM login timeout in seconds. Default: 240).
+    :param env: Dictionary with test environment.
+    :raises: cancel if
+                1. At start of test, KVM module is not loaded.
+                2. KVM, msr, vfio_pci is not built or loadable.
+                3. pci_device != ""
+                   a. vfio_pci is not built or loadable.
+                   b. Interrupt remapping is not enabled on host. Required for
+                      passthrough.
+                   c. Pci device/s not found on host system.
+                4. kvm_probe_module_parameters = "avic=1"
+                   a. Host doesnot support expected mode - avic or x2avic.
+                   b. Host doesnot have expected mode enabled for guest - avic
+                      or x2avic.
+             fails if
+                1. Pci device cannot be bind to vfio_pci module for passthrough.
+                   (pci_device != "")
+                2. Unable to login to guest within login timeout.
+    """
+    kvm_probe_module_parameters = params.get("kvm_probe_module_parameters", "")
+    login_timeout = int(params.get("login_timeout", 240))
+    pci_device = params.get("pci_device", "")
+    mode = params.get("mode", "x2apic")
+    driver_list = []
+    session = None
+    vm = None
+
+    try:
+
+        def check_avic_support():
+            """
+            Check if system supports avic.
+            """
+            cmd = "rdmsr -p 0 0xc00110dd --bitfield 13:13"
+            out = process.run(cmd, sudo=True, shell=True).stdout_text.strip()
+            if out == "0":
+                test.cancel("System doesnot support avic")
+
+        def check_x2avic_support():
+            """
+            check if system supports x2avic.
+            """
+            cmd = "rdmsr -p 0 0xc00110dd --bitfield 18:18"
+            out = process.run(cmd, sudo=True, shell=True).stdout_text.strip()
+            if out == "0":
+                test.cancel("System doesnot support x2avic")
+
+        def verify_avic_enablement(mode):
+            """
+            Check AVIC and x2AVIC status in dmesg logs diff.
+
+            :param mode: Whether apic or x2apic.
+            """
+
+            # Check for the "avic enabled" in dmesg
+            if not dmesg.check_kernel_logs("AVIC enabled"):
+                test.cancel("AVIC not enabled after loading kvm_amd with avic=1")
+
+            # Check for the "x2avic enabled" only if the test is "x2apic"
+            if (not dmesg.check_kernel_logs("x2AVIC enabled")) and (mode == "x2apic"):
+                test.cancel("x2AVIC not enabled after loading kvm_amd with avic=1.")
+
+        def prepare_pci_passthrough():
+            """
+            Validate IOMMU, Interrupt Remapping, and vfio-pci module availability
+            """
+
+            # Check if interrupt remapping is enabled on system
+            if not dmesg.check_kernel_logs("AMD-Vi: Interrupt remapping enabled"):
+                test.cancel("IOMMU interrupt remaping is not enabled")
+
+            # Check and load vfio-pci module
+            if not linux_modules.configure_module("vfio-pci", "CONFIG_VFIO_PCI"):
+                test.cancel("vfio-pci module can not be configured.")
+
+        def guest_system_details(session):
+            """
+            Collect guest system details
+
+            :param session: active guest login session
+            """
+            test.log.debug("Debug: %s", session.cmd_output("cat /etc/os-release"))
+            test.log.debug("Debug: %s", session.cmd_output("uname -a"))
+            test.log.debug("Debug: %s", session.cmd_output("ls /boot/"))
+            test.log.debug("Debug: %s", session.cmd_output("lspci -k"))
+            test.log.debug("Debug: %s", session.cmd_output("lscpu"))
+            test.log.debug("Debug: %s", session.cmd_output("lsblk"))
+            test.log.debug("Debug: %s", session.cmd_output("df -h"))
+            test.log.debug("Debug: %s", session.cmd_output("dmesg"))
+
+        # Check system support for avic or x2avic
+        if kvm_probe_module_parameters == "avic=1":
+            if not linux_modules.configure_module("msr", "CONFIG_X86_MSR"):
+                test.cancel("msr module can not be configured.")
+            if mode == "apic":
+                check_avic_support()
+            if mode == "x2apic":
+                check_x2avic_support()
+            # Validate dmesg for avic and x2avic enablement
+            verify_avic_enablement(mode)
+
+        # Passthrough device/s and validate if passthrough is successful
+        if pci_device != "":
+            # Perform pre-checks and prereq enablements before pci passthrough
+            prepare_pci_passthrough()
+
+            # Prepare for pci passthrough
+            for i in range(len(pci_device.split(" "))):
+                # Check if device input is valid
+                if pci_device.split(" ")[i] not in pci.get_pci_addresses():
+                    test.cancel("Please provide valid pci device input.")
+
+                driver_list.append(pci.get_driver(pci_device.split(" ")[i]))
+                pci.attach_driver(pci_device.split(" ")[i], "vfio-pci")
+                params["extra_params"] += (
+                    f" -device vfio-pci,host={pci_device.split(' ')[i]}"
+                )
+
+        params["start_vm"] = "yes"
+        vm = env.get_vm(params["main_vm"])
+        try:
+            env_process.preprocess_vm(test, params, env, params.get("main_vm"))
+            vm.verify_alive()
+        except Exception as e:
+            test.fail(f"Failed to create VM: {str(e)}")
+        try:
+            session = vm.wait_for_login(timeout=login_timeout)
+        except Exception as e:
+            test.fail(f"Failed to login VM: {str(e)}")
+        vm.verify_kernel_crash()
+
+        # Collect guest system details
+        guest_system_details(session)
+    except ValueError as e:
+        test.fail(f"{e}")
+    finally:
+        if session:
+            session.close()
+        if vm:
+            vm.destroy()
+        try:
+            if pci_device != "":
+                for i in range(len(pci_device.split(" "))):
+                    if pci_device.split(" ")[i] not in pci.get_pci_addresses():
+                        break
+                    if driver_list[i] is None:
+                        cur_driver = pci.get_driver(pci_device.split(" ")[i])
+                        if cur_driver is not None:
+                            pci.unbind(cur_driver, pci_device.split(" ")[i])
+                    else:
+                        pci.attach_driver(pci_device.split(" ")[i], driver_list[i])
+        except ValueError as e:
+            test.fail(f"Failed to reset devices after test: Reason {e}")