This repository contains the Python driver to communicate with a Sensirion sensor of the SHT4X family over I2C.
Click here to learn more about the Sensirion SHT4X sensor family.
| Sensor name | I²C Addresses |
|---|---|
| SHT40 | 0x44, 0x45 |
| SHT41 | 0x44, 0x45 |
| SHT45 | 0x44, 0x45 |
The following instructions and examples use a SHT40.
You can connect your sensor over a SEK-SensorBridge. For special setups you find the sensor pinout in the section below.
Sensor pinout
| Pin | Cable Color | Name | Description | Comments |
|---|---|---|---|---|
| 1 | green | SDA | I2C: Serial data input / output | |
| 2 | black | GND | Ground | |
| 3 | yellow | SCL | I2C: Serial clock input | |
| 4 | red | VDD | Supply Voltage | 1.1V to 3.6V |
See the documentation page for an API description and a quickstart example.
In case you want to contribute to this project, please read the contribution guidelines.
See LICENSE.