Rework output configuration options and their consumption

docs/source/contributing/testing.rst

@@ -292,10 +292,10 @@ Note the fixtures here:
 You have to generate a ``.json`` file first to be able to test your video. To
 do that, use ``helpers.save_control_data_from_video``.
 
-For instance, a test that will check if the l flag works properly will first
-require rendering a video using the -l flag from a scene. Then we will test
-(in this case, SquareToCircle), that lives in
-``test_scene_rendering/simple_scene.py``. Change directories to ``tests/``,
+For instance, a test that checks low-quality rendering first requires rendering
+a video from a scene with the ``-ql`` flag. The example below tests
+``SquareToCircle``, which lives in ``test_scene_rendering/simple_scene.py``.
+Change directories to ``tests/``,
 create a file (e.g. ``create\_data.py``) that you will remove as soon as
 you're done. Then run:
 

docs/source/faq/general.md

@@ -76,8 +76,9 @@ ones that are documented for the base classes {class}`.VMobject` and
 Yes: simply pass the CLI flag `-t` (or its long form `--transparent`).
 Note that the default video file format does not support transparency,
 which is why Manim will output a `.mov` instead of a `.mp4` when
-rendering with a transparent background. Other movie file formats
-that support transparency can be obtained by passing
+rendering with a transparent background. Explicitly requesting
+`--format=mp4` together with transparency is rejected. Other movie file
+formats that support transparency can be obtained by passing
 `--format=webm` or `--format=gif`.
 
 ---

docs/source/guides/configuration.rst

@@ -37,11 +37,20 @@ An example of using the above form is:
 This asks Manim to search for a Scene class called :code:`SceneOne` inside the
 file ``file.py`` and render it with medium quality (specified by the ``-qm`` flag).
 
-Another frequently used flag is ``-p`` ("preview"), which makes manim
-open the rendered video after it's done rendering.
+Another frequently used flag is ``-p`` ("preview"), which makes Manim
+open the rendered artifact after rendering. This behavior is the same for all
+renderers.
 
-.. note:: The ``-p`` flag does not change any properties of the global
-          ``config`` dict.  The ``-p`` flag is only a command-line convenience.
+Renderers may also support a live preview while the scene is evaluated. The
+OpenGL renderer provides this with ``-l`` (or ``--live-preview``):
+
+.. code-block:: bash
+
+   manim --renderer=opengl -l <file.py> SceneName
+
+With ``--format=auto``, live preview does not write a media file, keeping the
+interactive workflow fast. Pass a concrete format, such as ``--format=mp4``,
+to record the scene while displaying the live preview.
 
 Advanced examples
 =================
@@ -53,6 +62,10 @@ instead of the whole video, you can execute
 
    manim -sqh <file.py> SceneName
 
+The equivalent ``--format=png`` spelling uses the same fast final-state-only
+evaluation. Use ``--format=png-sequence`` when every rendered frame should be
+written as a numbered PNG instead.
+
 The following example specifies the output file name (with the :code:`-o`
 flag), renders only the first ten animations (:code:`-n` flag) with a white
 background (:code:`-c` flag), and saves the animation as a ``.gif`` instead of as a
@@ -161,7 +174,7 @@ and serve the same purpose.  Take, for example, the following config file.
    [CLI]
    # my config file
    output_file = myscene
-   save_as_gif = True
+   format = gif
    background_color = WHITE
 
 Config files are parsed with the standard python library ``configparser``. In
@@ -171,7 +184,7 @@ Now, executing the following command
 
 .. code-block:: bash
 
-   manim -o myscene -i -c WHITE <file.py> SceneName
+   manim -o myscene --format=gif -c WHITE <file.py> SceneName
 
 is equivalent to executing the following command, provided that ``manim.cfg``
 is in the same directory as <file.py>,
@@ -253,7 +266,7 @@ For example, take the following user-wide config file
    # user-wide
    [CLI]
    output_file = myscene
-   save_as_gif = True
+   format = gif
    background_color = WHITE
 
 and the following folder-wide file
@@ -262,7 +275,7 @@ and the following folder-wide file
 
    # folder-wide
    [CLI]
-   save_as_gif = False
+   format = auto
 
 Then, executing :code:`manim <file.py> SceneName` will be equivalent to not
 using any config files and executing
@@ -344,26 +357,17 @@ highest precedence is:
 5. any programmatic changes made after the config system is set.
 
 
-A list of all config options
-****************************
+Inspecting available config options
+***********************************
 
-.. code::
+Run ``manim cfg show`` to inspect the currently resolved configuration and
+``manim render --help`` for the authoritative list of render CLI options. The
+attributes available for programmatic configuration are documented on
+:class:`.ManimConfig`.
 
-   ['aspect_ratio', 'assets_dir', 'background_color', 'background_opacity',
-   'bottom', 'custom_folders', 'disable_caching', 'dry_run',
-   'encoder_queue_size', 'ffmpeg_loglevel', 'flush_cache', 'frame_height', 'frame_rate',
-   'frame_size', 'frame_width', 'frame_x_radius', 'frame_y_radius',
-   'from_animation_number', `fullscreen`, 'images_dir', 'input_file', 'left_side',
-   'log_dir', 'log_to_file', 'max_files_cached', 'max_inflight_encoders',
-   'media_dir', 'media_width', 'movie_file_extension', 'notify_outdated_version',
-   'output_file', 'partial_movie_dir',
-   'pixel_height', 'pixel_width', 'plugins', 'preview',
-   'progress_bar', 'quality', 'right_side', 'save_as_gif', 'save_last_frame',
-   'save_pngs', 'scene_names', 'show_in_file_browser', 'sound', 'tex_dir',
-   'tex_template', 'tex_template_file', 'text_dir', 'top', 'transparent',
-   'upto_animation_number', 'use_opengl_renderer', 'verbosity', 'video_dir',
-   'window_position', 'window_monitor', 'window_size', 'write_all', 'write_to_movie',
-   'enable_wireframe', 'force_window']
+Some CLI conveniences intentionally map to a canonical configuration value. In
+particular, ``-s`` / ``--save_last_frame`` sets ``format = png``; configuration
+files should use the canonical ``format`` option directly.
 
 
 Accessing CLI command options

docs/source/guides/deep_dive.rst

@@ -119,19 +119,19 @@ Preliminaries
 Importing the library
 ^^^^^^^^^^^^^^^^^^^^^
 
-Independent of how exactly you are telling your system
-to render the scene, i.e., whether you run ``manim -qm -p file_name.py ToyExample``, or
-whether you are rendering the scene directly from the Python script via a snippet
-like
+You can ask Manim to render in several ways. For example, you can run
+``manim -qm -p file_name.py ToyExample`` or render directly from a Python script
+with a snippet like
 
 ::
 
     with tempconfig({"quality": "medium_quality", "preview": True}):
         scene = ToyExample()
         scene.render()
 
-or whether you are rendering the code in a Jupyter notebook, you are still telling your
-python interpreter to import the library. The usual pattern used to do this is
+Whether you are rendering this way or from a Jupyter notebook, you are still
+telling your Python interpreter to import the library. The usual pattern used to
+do this is
 
 ::
 
@@ -243,7 +243,7 @@ then calls the scene's render method in the
 **Jupyter notebooks.** In Jupyter notebooks, the communication with the library
 is handled by the ``%%manim`` magic command, which is implemented in the
 ``manim.utils.ipython_magic`` module. There is
-:meth:`some documentation <.ManimMagic.manim>` available for the magic command,
+:meth:`some documentation <.ManimMagic.manim>` available for the magic command.
 The implementation instantiates the requested scene and calls its render method;
 the scene attaches a manager lazily through that entry point.
 
@@ -263,18 +263,38 @@ depend on any configuration options set in ``config``. Then the scene inspects t
 ``config.renderer``, and based on its value, either instantiates a ``CairoRenderer`` or an
 ``OpenGLRenderer`` object and assigns it to its ``renderer`` attribute.
 
-The scene then asks its renderer to initialize the scene by calling
+After selecting the renderer, the scene resolves the mutable configuration into
+one immutable render-session specification. In abbreviated form, initialization
+continues as follows:
 
 ::
 
-    self.renderer.init_scene(self)
-
-Inspecting both the default Cairo renderer and the OpenGL renderer shows that the ``init_scene``
-method effectively makes the renderer instantiate a :class:`.SceneFileWriter` object, which
-basically is Manim's interface to ``libav`` (FFMPEG) and actually writes the movie file. The Cairo
-renderer (see the implementation `here <https://github.com/ManimCommunity/manim/blob/main/manim/renderer/cairo_renderer.py>`__) does not require any further initialization. The OpenGL renderer
-does some additional setup to enable the realtime rendering preview window, which we do not go
-into detail further here.
+    self.session_spec = resolve_render_session(
+        config,
+        self.renderer.capabilities,
+        renderer_name=type(self.renderer).__name__,
+    )
+    self.renderer.init_scene(self, self.session_spec)
+
+The session specification separates primary artifact intent (an ``OutputSpec``)
+from presentation requests such as opening the completed artifact or displaying
+a live preview. It also preserves whether dry-run execution was requested. A dry
+run and an artifact-less render both have an effective output format of ``none``,
+but the reason remains available without rereading mutable global configuration.
+Resolution also validates requests against the selected renderer's capabilities.
+For example, Cairo rejects live preview, while OpenGL advertises support for it.
+With ``format = auto``, requesting live preview selects no file output; a
+concrete format records the render as well.
+
+Inspecting the initialization methods of both renderers shows that they
+instantiate a :class:`.SceneFileWriter`. The writer must receive the already
+resolved ``OutputSpec``. It remains Manim's interface to ``libav`` for
+encoding media. The Cairo renderer (see the implementation `here
+<https://github.com/ManimCommunity/manim/blob/main/manim/renderer/cairo_renderer.py>`__)
+does not require further renderer-specific initialization. OpenGL creates a
+window only when the resolved presentation specification requests a live preview.
+The ``-p`` / ``--preview`` option does not create this window; it opens the
+completed artifact after rendering.
 
 After the renderer has been instantiated and initialized its file writer, the scene
 populates further initial attributes (notable mention: the ``mobjects`` attribute
@@ -284,9 +304,11 @@ attribute is initially ``None`` unless the caller attaches a manager explicitly.
 .. warning::
 
     :class:`.Manager` is an incremental coordination boundary. At this stage the
-    renderer still owns its camera, clock, play count, skip state, and file writer;
-    the manager exposes forwarding views of them. The scene and renderer therefore
-    still have substantial interplay that later refactors aim to remove.
+    scene captures the immutable session specification before renderer
+    initialization, while the renderer still owns its camera, clock, play count,
+    skip state, and file writer. The manager exposes the session and forwarding
+    views of renderer state. The scene and renderer therefore still have
+    substantial interplay that later refactors aim to remove.
 
 The rest of this article is concerned with the last line in our toy example script::
 
@@ -314,11 +336,15 @@ The first three call the corresponding customizable scene hooks:
 
 After these hooks have run, :meth:`.Manager.post_construct` asks the renderer to
 finish the scene. For Cairo this calls :meth:`.CairoRenderer.scene_finished`,
-which checks whether animations have been played and tells the
-:class:`.SceneFileWriter` to finish the output. For video output, the file writer
-waits for partial movie files that are still being encoded and combines them into
-the final movie. If no animations have been played, Manim assumes that a static
-image should be output.
+which checks the resolved output intent and tells the :class:`.SceneFileWriter`
+to finish any time-based output. For video output, the file writer waits for
+partial movie files that are still being encoded and combines them into the
+final movie. Single-PNG output skips any remaining animation frames and renders
+a single image. A video request for a scene without any play calls produces a
+useful still image instead of an empty movie. The writer records the completed
+artifact as ``final_file_path``. After finalization, the manager uses the
+presentation specification to open the artifact or reveal it in the file
+browser.
 
 **Back in our toy example,** the call to :meth:`.Scene.render` creates a manager,
 then :meth:`.Manager.render` triggers :meth:`.Scene.setup` (which only consists of
@@ -1038,9 +1064,11 @@ calls the scene's cleanup method :meth:`.Scene.tear_down`, followed by
 scene, and the renderer in turn asks its scene file writer to wrap things up by
 calling :meth:`.SceneFileWriter.finish`. The file writer first waits for all
 remaining encoding jobs, then combines the completed partial movie files into the
-final product. If rendering aborts during a play instead, the manager asks the file
-writer to abort its encoding jobs; the incomplete current partial movie file is
-removed so that it cannot be mistaken for a valid cached result on a later render.
+final product and records its path. If rendering aborts during a play instead, the
+manager asks the file writer to abort its encoding jobs; the incomplete current
+partial movie file is removed so that it cannot be mistaken for a valid cached
+result on a later render. Once output is finalized, the manager carries out any
+post-render presentation request from the immutable session specification.
 
 And there you go! This is a more or less detailed description of how Manim works
 under the hood. While we did not discuss every single line of code in detail

docs/source/installation/docker.rst

@@ -14,9 +14,9 @@ For our image ``manimcommunity/manim``, there are the following tags:
 
 .. note::
 
-   When using Manim's CLI within a Docker container, some flags like
-   ``-p`` (preview file) and ``-f`` (show output file in the file browser)
-   are not supported.
+   When using Manim's CLI within a Docker container, options that launch host
+   applications, such as ``-p`` and ``--show_in_file_browser``, are not
+   supported. Live preview also requires explicit display forwarding.
 
 .. note::