Issues

• CI scripts exit successfully for unknown commands and options

  1technophile/OpenMQTTGateway#2399 · Filter by author dajiaohuang opened on Oct 3, 2026

• ISNO Super profile leaves the active CC1101 tuned to 433.92 MHz

  1technophile/OpenMQTTGateway#2397 · Filter by author dajiaohuang opened on Oct 3, 2026

• Sonoff RF Bridge ignores configured RF_SEND_TIMES

  1technophile/OpenMQTTGateway#2396 · Filter by author dajiaohuang opened on Oct 2, 2026

• HCSR04 readings are filtered because the message has no origin

  1technophile/OpenMQTTGateway#2394 · Filter by author dajiaohuang opened on Oct 2, 2026

• GPIOKeyCode debounce setting is unused

  1technophile/OpenMQTTGateway#2393 · Filter by author dajiaohuang opened on Oct 2, 2026

• C37 sensor resolution setting is not wired to analogReadResolution

  1technophile/OpenMQTTGateway#2392 · Filter by author dajiaohuang opened on Oct 2, 2026

• Reject unsupported RF active receiver values before switching

  1technophile/OpenMQTTGateway#2391 · Filter by author dajiaohuang opened on Oct 2, 2026

• Out-of-range MQTT powermode can disable the network without sleeping

  1technophile/OpenMQTTGateway#2390 · Filter by author dajiaohuang opened on Oct 2, 2026

• Addressable LED brightness is applied twice

  1technophile/OpenMQTTGateway#2389 · Filter by author dajiaohuang opened on Oct 2, 2026

• WebUI displays LoRa ADC value on the humidity line

  1technophile/OpenMQTTGateway#2388 · Filter by author dajiaohuang opened on Oct 2, 2026

• Ethernet full-duplex state is always reported as true

  1technophile/OpenMQTTGateway#2387 · Filter by author dajiaohuang opened on Oct 2, 2026

• OledSerial::write reports zero bytes after drawing

  1technophile/OpenMQTTGateway#2386 · Filter by author dajiaohuang opened on Oct 2, 2026

• Invalid Somfy remote can leave the RF receiver disabled

  1technophile/OpenMQTTGateway#2385 · Filter by author dajiaohuang opened on Oct 2, 2026

• Low 2G signal recursively restarts setup without a retry bound

  1technophile/OpenMQTTGateway#2384 · Filter by author dajiaohuang opened on Oct 2, 2026

• 2G unread SMS scan can overflow its location array

  1technophile/OpenMQTTGateway#2383 · Filter by author dajiaohuang opened on Oct 2, 2026

• RFM69 simple receiver copies a fixed-length payload from a shorter string

  1technophile/OpenMQTTGateway#2382 · Filter by author dajiaohuang opened on Oct 2, 2026

• BH1750 failed I2C reads still copy uninitialized measurements

  1technophile/OpenMQTTGateway#2381 · Filter by author dajiaohuang opened on Oct 2, 2026

• RTL_433 HA discovery doesn't expose contact state for DSC (closed) and Kerui (opened) sensors

  1technophile/OpenMQTTGateway#2375 · Filter by author yanky79 opened on Sep 21, 2026
  1

• Buffer overflow in call to dtostrf()

  1technophile/OpenMQTTGateway#2367 · Filter by author mgerczuk opened on Sep 11, 2026
  1

• [CLEANUP] Consolidate duplicated static-IP (NET_*) parsing in main.cpp

  1technophile/OpenMQTTGateway#2354 · Filter by author 1technophile opened on Aug 15, 2026

• FR: Add ability to log to SD card for debugging

  1technophile/OpenMQTTGateway#2343 · Filter by author puterboy opened on Jul 28, 2026

• Binary serial log output rather than readable text sometimes when device reboots

  1technophile/OpenMQTTGateway#2338 · Filter by author puterboy opened on Jul 14, 2026
  3

• Development build for esp32c3-dev-c2-ble panic-loop

  stale
  1technophile/OpenMQTTGateway#2336 · Filter by author palto42 opened on Jul 4, 2026
  1

• Is it possible to get OpenMQTTGateway to reboot if it loses connection with the MQTT broker and/or the Internet?

  1technophile/OpenMQTTGateway#2213 · Filter by author puterboy opened on Jul 13, 2025
  13

• Allow setting of MAC address for devices that allow setting it (ESP32)

  1technophile/OpenMQTTGateway#2124 · Filter by author puterboy opened on Nov 28, 2024
  14