This program is intended to be used with the Moog DFAM semi-modular instrument. It allows for sequences less than 8 steps long to be played and features a fast-reset button and reset input.
| I/O | Usage |
|---|---|
din |
External clock signal |
ain |
External reset signal |
b1 |
Manual advance button |
b2 |
Manual reset button |
k1 |
Pattern length selection |
k2 |
Step size selection |
cv1 |
Clock output |
cv2 |
End of sequence gate |
cv3 |
Unused |
cv4 |
Unused |
cv5 |
Unused |
cv6 |
Unused |
Connect your clock source or square LFO to din and connect cv1 to DFAM's ADV/CLOCK input.
Optionally, connect a reset source to ain to automatically reset EuroPi and DFAM (e.g. a
clock-stop signal from Pam's Workout).
Patch EuroPi and DFAM as described above.
Manually advance DFAM so the last sequence LED is illuminated. Then start DFAM by pressing the
Start/Stop button. DFAM will now automatically advance every time a pulse is sent from cv1 of
EuroPi.
When using DFAM Controller with a pattern length that is not 8, DFAM will skip steps
between length - 1 and 7; this is to say, the last Velocity and Pitch knobs on DFAM's
sequencer will always control the last element of the sequence.
For example, if you only want a 5-step sequence, you should set DFAM's 1, 2, 3, 4, and 8 knobs, not 1, 2, 3, 4, and 5.