settings.conf.default

# settings for run_cast.sh

[general]
# Version
version=2.7.0
# Rtkbase upgrade mandatory "checkpoint"
checkpoint_version=2.8.0
# User who runs str2str_file service
user=
# NTRIP caster program
BASEDIR=$(dirname "$0")
#path to the caster application
cast=/usr/local/bin/str2str
#Web frontend port
web_port=80
#set true if you want to enter a password to open the web gui.
web_authentification=true
#enter here your new password for web gui 
#(it will be erased during the next web server start)
new_web_password=
#don't touch this one
web_password_hash=pbkdf2:sha256:150000$kWdEE8eU$d30b1a75e5cf898684bad60b47a45a8058b6c33535560be005b6e0110b947cf6
#key needed to add an aerial image layer
maptiler_key=
#Receive prerelease update (beta version)
prerelease=False
#Cpu temp offset for Orange Pi Zero LTS (+30°C)
cpu_temp_offset=0

[main]
#base coordinates: lat long height
position='47.0983869 -1.2655108 36.40'
#gnss receiver com port
com_port=''
#gnss receiver com port settings
com_port_settings='38400:8:n:1'
#receiver model
receiver='unknown'
#gnss receiver format
receiver_format=''
#gnss receiver firmware release
receiver_firmware=''
#gnss receiver frequency available
receiver_carrier=''
#Antenna info, id, serial number. Without space inside the strings
antenna_info='ADVNULLANTENNA'
#Tcp host address to bind the tcp stream
tcp_host_addr='127.0.0.1'
#tcp port for RAW stream. If you change this value, edit gpsd conf file to reflect the port in DEVICES.
tcp_port='5015'
#ext_tcp_source is mainly for dev purpose to receive a raw stream from another base
ext_tcp_source=''
#ext_tcp_port is the port used for ext_tcp_source
ext_tcp_port=''
#ip address of the integrated web service (ie on Mosaic X5)
gnss_rcv_web_ip=192.168.3.1
#port number for the Flask proxy app used to display the Gnss receiver web service
gnss_rcv_web_proxy_port=9090
#port number for the raw2nmea service
nmea_port='5014'

[local_storage]

# File options for local data storage

#gnss data storage directory
datadir=$BASEDIR/data
#gnss data filename	    
file_name='%Y-%m-%d_%h-%M-%S_GNSS-1'
#file rotate time in hour
file_rotate_time='24'
#file overlap time in seconds
file_overlap_time='0'
#name for the compressed archive
archive_name=$(date -d "-1 days" +"%Y-%m-%d_%S").zip
#archives older than this value (in days) will be deleted by archive_and_clean.sh
archive_rotate='60'
#minum free space on device (in MB) before oldest archives are deleted
min_free_space='500'

[ntrip_A]

# NTRIP A caster options

#ntrip A caster url
svr_addr_a='caster.centipede.fr'
#ntrip A caster port
svr_port_a='2101'
#ntrip A caster password
svr_pwd_a=''
#Mount name
mnt_name_a='Your_mount_name'
rtcm_msg_a='1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230'
#Receiver dependent options
ntrip_a_receiver_options=''

[ntrip_B]

# NTRIP B caster options

#ntrip B caster url
svr_addr_b='caster.centipede.fr'
#ntrip B caster port
svr_port_b='2101'
#ntrip B caster password
svr_pwd_b=''
#Mount name
mnt_name_b='Your_mount_name'
rtcm_msg_b='1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230'
#Receiver dependent options
ntrip_b_receiver_options=''

[local_ntrip_caster]

# local NTRIP caster options
# These options are needed when you set your base as a NTRIP caster

#user/password credentials to connect to this local caster
local_ntripc_user=''
local_ntripc_pwd=''
#local ntrip port
local_ntripc_port='2101'
#mount point name for this local ntrip caster
local_ntripc_mnt_name=''
local_ntripc_msg='1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230'
#Receiver dependent options
local_ntripc_receiver_options=''

[rtcm_svr]

# RTCM server options

#port for rtcm local use
rtcm_svr_port='5016'
#messages for rtcm local use
rtcm_svr_msg='1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230'
#Receiver dependent options
rtcm_receiver_options=''

[rtcm_client]

# RTCM client options

#port for rtcm client
rtcm_client_addr=''
rtcm_client_port='80'
#user/password credentials to connect to the server
rtcm_client_user=''
rtcm_client_pwd=''
#messages for rtcm client use
rtcm_client_msg='1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230'
#Receiver dependent options
rtcm_client_receiver_options=''

[rtcm_udp_svr]

#RTCM UDP Server options

#port for rtcm UDP use
rtcm_udp_svr_port=''
#messages for rtcm udp use
rtcm_udp_svr_msg='1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230'
#Receiver dependent options
rtcm_udp_svr_receiver_options=''

[rtcm_udp_client]

#RTCM UDP Client options

#address for rtcm UDP
rtcm_udp_client_addr=''
#port for rtcm UDP use
rtcm_udp_client_port=''
#messages for rtcm udp use
rtcm_udp_client_msg='1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230'
#Receiver dependent options
rtcm_udp_client_receiver_options=''

[rtcm_serial]

# Serial output RTCM options

#serial output for rtcm local use
out_com_port=''
#serial output settings
out_com_port_settings='115200:8:n:1'
#messages for rtcm local use
rtcm_serial_msg='1004,1005(10),1006,1008(10),1012,1019,1020,1033(10),1042,1045,1046,1077,1087,1097,1107,1127,1230'
#Receiver dependent options
rtcm_serial_receiver_options=''

[log]

#log directory
logdir=$BASEDIR/logs
#log trace level (0: no trace)
level=0

[network]
#lte modem port
modem_at_port=''